 |
 |
 |
 |
All slide models are available as X-Y Tables and Stages. They offer the same features and benefits as their single axis slide series counterparts.
X-Y Tables and stages are configured for:
- Manual positioning
- Motor ready for your drives
- DC motor drive
- Stepping motor drive
- Servo motor drive
How to Order - Part # and Travels
MS Series - XY Slide Table Dimensions
MS Series - XY Slide Table Dimensions
T = Travel
| Series |
L |
H |
W |
W1 |
M |
M1 |
M2 |
N1 |
S1 |
N2 |
S2 |
M3 |
M4 |
M5 |
M6 |
| MS200 |
3.0+T |
2.50 |
2.00 |
2.00 |
2.5+T |
1.25 |
N/A |
4 |
1/4 |
4 |
10-32 |
1.50 |
N/A |
N/A |
N/A |
| MS315 |
4.5+T |
3.50 |
3.15 |
3.00 |
3.75+T |
1.88 |
N/A |
4 |
5/16 |
4 |
1/4-20 |
2.50 |
N/A |
N/A |
N/A |
| MS400 |
6.5+T |
4.75 |
4.00 |
4.00 |
5.25+T |
2.38 |
N/A |
4 |
3/8 |
4 |
5/16-18 |
3.25 |
N/A |
N/A |
N/A |
| MS600 |
8.5+T |
4.63 |
6.00 |
6.00 |
7.25+T |
4.25 |
N/A |
4 |
3/8 |
6 |
5/16-18 |
5.00 |
2.50 |
N/A |
N/A |
| MS850 |
11+T |
8.25 |
8.50 |
8.00 |
9.5+T |
7.63 |
2.38 |
8 |
3/8 |
8 |
3/8-16 |
6.00 |
N/A |
2.38 |
N/A |
| MS1000 |
13+T |
8.25 |
10.00 |
10.00 |
11.5+T |
9.13 |
2.38 |
8 |
3/8 |
8 |
3/8-16 |
7.50 |
N/A |
2.50 |
N/A |
| MS1200 |
15+T |
8.75 |
12.00 |
12.00 |
13.5+T |
11.13 |
5.88 |
8 |
3/8 |
8 |
3/8-16 |
9.00 |
4.50 |
N/A |
4.50 |
| MS1800 |
21+T |
8.75 |
18.00 |
18.00 |
19.5+T |
17.13 |
11.88 |
8 |
3/8 |
8 |
3/8-16 |
15.00 |
7.50 |
N/A |
7.50 |
X-Y Slide Tables and Stages
Part Number = (Series) - (X-Travel) - (Material Option) - (Other Options)
Example - MS600-8-4-AL-S3
| MS600 series slide | 8" travel on X-Axis | 4" Travel on Y-Axis, | Hardcote Aluminum construction (standard on MS series Slides), | 1/2-20 UNF drive screw (standard on MS series slides) |
| Series | X-Travel | Y-Travel | Material Options | Other Options |
| BS45 | 1" to 16" | 1" to 16" | ST = Steel | NS = No drive screw |
| MS200 | 1" to 20" | 1" to 20" | AL= Hardcote Alum. | S1 = 10-32 UNF drive screw |
| MS315 | 1" to 24" | 1" to 24" | D= Delrin | S2 - 1/4-20 UNC Drive screw |
| MS400 | 1" to 36" | 1" to 36" | CI= Cast Iron | S3 = 1/2-20 UNF drive screw |
| MS600 | 1" to 72" | 1" to 72" | SST= Stainless Steel | S4 = 1/2-13 UNC drive screw |
| MS850 | 1" to 144" | 1" to 72" | CM = Custom material | S5 = 5/8-10 Acme drive screw |
| MS1000 | 1" to 144" | 1" to 72" | S6 = 3/4-5 Acme drive screw | |
| MS1200 | 1" to 240" | 1" to 72" | S7 = 3/4-10 Acme drive screw | |
| MS1800 | 1" to 240" | 1" to 72" | S8 = 1.0-5 Acme drive screw | |
| UDH2 | 1" to 16" | 1" to 16" | S9 = 1.0-10 Acme drive screw | |
| UDH3 | 1" to 24" | 1" to 24" | CS = Custom screw - (provide description) | |
| UDH4 | 1" to 36" | 1" to 36" | HD1.5 = 1.5" Handwheel | |
| UDH6 | 1" to 36" | 1" to 36" | HD2 = 2" Handwheel | |
| UDH8 | 1" to 36" | 1" to 36" | HD3 = 3" Handwheel | |
| UDH10 | 1" to 36" | 1" to 36" | HD4 = 4" Handwheel | |
| UDL2 | 1" to 36" | 1" to 36" | HD6 = 6" Handwheel | |
| UDL3 | 1" to 36" | 1" to 36" | HD8 = 8" Handwheel | |
| UDL4 | 1" to 36" | 1" to 36" | HD10 = 10" Handwheel | |
| UDL6 | 1" to 36" | 1" to 36" | RCH = Ratacheting Crank Handle | |
| UDL8 | 1" to 36" | 1" to 36" | D = Digital position indicator | |
| UDL10 | 1" to 36" | 1" to 36" | CMT = Custom mounting (provide drawing) | |
| UDC3 | 1" to 24" | 1" to 24" | MR = Motor ready (specify motor) | |
| DC = DC motor drive | ||||
| SM = Smart motor drive (steping) | ||||
| Servo = Servo motor drive |
Note:
-
The X-Axis is always the bottom or primary axis.
-
The Y-Axis is the upper, or secondary axis.
-
When looking down on the table with the x-axis drive end pointing toward you, the Y-Axis drive is on the right. This is standard or right hand configuration.
-
To order a slide table with the Y-Axis drive pointing to the left ask for the left hand version.
GENERIC SLIDES
1049 William Flynn Highway | Suite 300 | Glenshaw, PA 15116
Phone: 412/ 492-7272 | Fax: 412/ 492-7171 | Email: sales@genericslides.com